[cisco-voip] SIP overlapping DN's

[Scott Voll]

Kent--

thanks for the response.  I love the option of prepending digits.  That
would work slick.

but after I sent the email, I did find that my PRI for Fax is coming in
with 10 digits.  So I'm going to just add a Translation pattern for the 10
digits and strip at 4 digits and send to fax server CSS.  That will work
the best for me.

Thanks again for the reply.

Scott


On Wed, Oct 21, 2020 at 12:18 PM Kent Roberts <kent at fredf.org> wrote:

> You can prepend digits from each pri and adjust in cucm……. You can setup
> profiles….
>
> Are you using full 10 or 11 digits from your carrier ?   If not, that
> would be a whole lot easier once moving to the world of sip
>
> > On Oct 21, 2020, at 12:42 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> >
> > I have three PRI;s on a VGW that are Voice DN's.
> > I have one PRI that overlaps DN's but it's connected to our Right Fax
> server.
> >
> > right Now I'm doing MGCP. but moving to SIP to support Gateway based
> recording.
> >
> > with MGCP I can use partitions to route the two different sets of DN's.
> How do I do that with SIP?
> >
> > TIA
> >
> > Scott
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20201021/c7b9f01d/attachment.htm>