[cisco-voip] CUM 11.5 report question

[Lelio Fulgenzi]

If you haven't setup Jabber analytics on control hub, it takes a jabber-config.xml change (and reload) and then waiting two days.

From: James Dust <james.dust at charles-stanley.co.uk>
Sent: Wednesday, April 21, 2021 3:53 PM
To: Lelio Fulgenzi <lelio at uoguelph.ca>; cisco-voip at puck.nether.net
Subject: RE: CUM 11.5 report question

CAUTION: This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to IThelp at uoguelph.ca<mailto:IThelp at uoguelph.ca>

Very kind thank you Lelio,

Kind regards

James

Sent with BlackBerry Work
(www.blackberry.com<http://www.blackberry.com>)

From: Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>>
Date: Wednesday, 21 Apr 2021, 8:52 pm
To: James Dust <james.dust at charles-stanley.co.uk<mailto:james.dust at charles-stanley.co.uk>>, cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: RE: CUM 11.5 report question

This message originates from outside Charles Stanley. Please do not click links or open attachments unless you know the sender and are confident the content is safe.
Hey James,

I do this a couple of ways. First, I use Jabber analytics on Control Hub. This gives a good view. But, I think the metrics might be skewed.

The other way is through RTMT. You can search for Jabber devices, i.e. CSF, TCT, etc and choose registered or not registered, then, sort by version.

Unfortunately there is no export from the RTMT tool, but, it should give you what you need.

Lelio


From: cisco-voip <cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>> On Behalf Of James Dust
Sent: Wednesday, April 21, 2021 3:16 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] CUM 11.5 report question

CAUTION: This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to IThelp at uoguelph.ca<mailto:IThelp at uoguelph.ca>

Good evening all,

Does anyone know if there is a  way to run a report, on the active load ID of a TCT, CSF or BOT profile on cucm.

I need to carry out an audit, to see if any staff members are still using Cisco Jabber.

Many thanks

James

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20210421/9f3fb80d/attachment.htm>