[cisco-voip] CUCM PLAR SIP 8851

[Myron Young]

I have it working with an 8841 and we have both the SIP dial rule as well as the blank translation pattern.

 Also there shouldn’t be any CSS on the phone, only on the line which has the Plar destination

On Jul 2, 2021, at 2:10 PM, Anthony Holloway <avholloway+cisco-voip at gmail.com> wrote:


It's been a while for me, but I think you need both: blank xlate and sip dial rule.  Contrast this with a sccp phone, which only needs the xlate.

Did you do both, or just one and then the other?

On Fri, Jul 2, 2021 at 5:49 AM Abbas Wali <abbaseo at gmail.com<mailto:abbaseo at gmail.com>> wrote:
having issues with config. PLAR for a SIP 8851 phone. tried the blank Part didnt work, tried the SIP dial rules with button or blank Pattern still the same. any help?

thank you

--AW
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20210702/b0ddafed/attachment.htm>