[cisco-voip] CUCM PLAR SIP 8851

[Abbas Wali]

could it be the phone firmware, i am using 12-5-1sr2-2

On Fri, 2 Jul 2021 at 19:28, Myron Young <mdavid_young at hotmail.com> wrote:

> I have it working with an 8841 and we have both the SIP dial rule as well
> as the blank translation pattern.
>
>  Also there shouldn’t be any CSS on the phone, only on the line which has
> the Plar destination
>
> On Jul 2, 2021, at 2:10 PM, Anthony Holloway <
> avholloway+cisco-voip at gmail.com> wrote:
>
> 
> It's been a while for me, but I think you need both: blank xlate and sip
> dial rule.  Contrast this with a sccp phone, which only needs the xlate.
>
> Did you do both, or just one and then the other?
>
> On Fri, Jul 2, 2021 at 5:49 AM Abbas Wali <abbaseo at gmail.com> wrote:
>
>> having issues with config. PLAR for a SIP 8851 phone. tried the blank
>> Part didnt work, tried the SIP dial rules with button or blank Pattern
>> still the same. any help?
>>
>> thank you
>>
>> --*AW*
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

-- 
*Abbas Wali*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20210705/b66eec63/attachment.htm>