[cisco-voip] CUCM PLAR SIP 8851

[Abbas Wali]

resolved
it was when you add the SIp dial rule you have to "Add Plar" button and we
were trying the Add Pattern instead. specify the button and thats that.

thank you all.


On Tue, 6 Jul 2021 at 00:41, Myron Young <mdavid_young at hotmail.com> wrote:

> Don’t think so, but not sure. I’m using 12-8-1-0001-455
>
> On Jul 5, 2021, at 8:11 AM, Abbas Wali <abbaseo at gmail.com> wrote:
>
> 
> could it be the phone firmware, i am using 12-5-1sr2-2
>
> On Fri, 2 Jul 2021 at 19:28, Myron Young <mdavid_young at hotmail.com> wrote:
>
>> I have it working with an 8841 and we have both the SIP dial rule as well
>> as the blank translation pattern.
>>
>>  Also there shouldn’t be any CSS on the phone, only on the line which has
>> the Plar destination
>>
>> On Jul 2, 2021, at 2:10 PM, Anthony Holloway <
>> avholloway+cisco-voip at gmail.com> wrote:
>>
>> 
>> It's been a while for me, but I think you need both: blank xlate and sip
>> dial rule.  Contrast this with a sccp phone, which only needs the xlate.
>>
>> Did you do both, or just one and then the other?
>>
>> On Fri, Jul 2, 2021 at 5:49 AM Abbas Wali <abbaseo at gmail.com> wrote:
>>
>>> having issues with config. PLAR for a SIP 8851 phone. tried the blank
>>> Part didnt work, tried the SIP dial rules with button or blank Pattern
>>> still the same. any help?
>>>
>>> thank you
>>>
>>> --*AW*
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> --
> *Abbas Wali*
>
>

-- 
*Abbas Wali*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20210707/23dbe4cb/attachment.htm>