[cisco-voip] MRA phones tuck at registering after internet blip

[Jonathan Charles]

I am running into a similar issue... did you find a solution?

On Tue, Oct 26, 2021 at 7:50 AM Matthew Huff <mhuff at ox.com> wrote:

> We are just starting to roll out our Cisco 8800 series phones via MRA, and
> have run into a small problem. As is common with residential ISPs when they
> do a firmware update, network maintenance, etc overnight the phones get
> disconnected and even when the internet comes back, the phones are still at
> “Registering…” on the phones. If the user notices this and powers cycles
> the phone it comes right back, but it can cause them to miss calls if they
> don’t notice it.
>
>
>
> Is there any tunables to address this?
>
>
>
> *Matthew Huff* | Director of Technical Operations | OTA Management LLC
>
>
>
> *Office: 914-460-4039*
>
> *mhuff at ox.com <mhuff at ox.com> | **www.ox.com <http://www.ox.com>*
>
>
> *...........................................................................................................................................*
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20211118/81c0dbb3/attachment.htm>