[cisco-voip] Question about call forwarding single channel on ISDN PRI (H.323 to UCM)

[Kent Roberts]

I did this using e164 dial list   Based on destinations. But you could do it with ani as well I did find the info on the net.    I can dig it up if you need


Kent

> On Sep 9, 2021, at 07:28, Tim Reimers <treimers at ashevillenc.gov> wrote:
> 
> 
> Hi all -
> 
> Long time lurker here, haven't posted in several years.
> 
> I am trying to figure out how to _selectively_  forward calls arriving on an ISDN PRI, based on incoming CallerID.
> (eg, test with just my cell phone, and not forward all calls) 
> 
> This is on an 2821 IOS voice gateway that runs H.323 to a UCM 9.1 server.
> No MGCP here.
> 
> I'd prefer to handle this forwarding directly on the router, but can do so on the UCM
> if I need to.
> 
> Normally the dial peers send all inbound calls on the IOS voice gateway to either
> the UCM or the RightFax server (session-target style)
> 
> Can this be done based on the incoming CallerID? 
> That way, I can forward only calls from certain test phones.
> 
> Thanks Tim
> 
> 
> -- 
> Quis custodiet ipsos nexus
> 
> Tim Reimers
> 
> Network Administrator
> 
> I.T Services
> 
> City of Asheville
> 
> treimers at ashevillenc.gov
> 
> (desk) 828-259-5512
> 
> (cell)   828-552-1585
> 
> Please do NOT use the contact information above for unsolicited sales contacts.
> 
> All unsolicited sales calls > /dev/null
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20210909/ee783826/attachment.htm>