[e-nsp] failed POST on summit?

[Fabian PROUT]

Hi Josh,

You should be able to get more details with the command 'show diag'.

Regards, Fabian.
-----Message d'origine-----
De : extreme-nsp-bounces at puck.nether.net
[mailto:extreme-nsp-bounces at puck.nether.net] De la part de Josh
Envoyé : mardi 16 décembre 2003 09:17
À : extreme-nsp at puck.nether.net
Objet : [e-nsp] failed POST on summit?



I just picked two used Summit switches (a 48 and 24 - older series, not
'i').

When they boot up they show:
ExtremeWare
Copyright (C) 1999 by Extreme Networks
===============================================

Version 4.1.19 (Build 2)   By Release_Master  on Wed 08/09/2000   6:09p
System Serial Number: 0107M00022
Memory Size: 33554432 (32MB)
MAC Address: 00:01:30:b5:6b:00

ASIC register and memory test ..........passed
Start running diagnostic test
.................................................
........................................................................
......
.............................................failed

Copyright (C) 1999 by  Extreme Networks
login:


So the mystery is that the green light flashes properly after bootup
(which indicates POST was ok according to the manual) - and the switch
seems to work ok.  How do I figure out what the 'failed' is in reference
to?  Could this be due to just not having GBIC's installed?  Or is this
a real hardware issue?

Thanks for any help!

-josh

_______________________________________________
extreme-nsp mailing list
extreme-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp