[e-nsp] Changing display string of port?

[Jeff Hancock]

One of the ports in our BD (6.2.2b68) has had the misfortune of being
configured with a display-string of "2".  The actual port number is
2:30.  We're trying to configure the port, but the display-string is
causing "issues".

For example:
CES1.LONI:13 # conf port 2                
Next possible completions:
        <port id> 

CES1.LONI:13 # conf port 2 redundant 

I've tried variations on using unconfigure or "2"ing the port name with
no luck.

The options I think I have are:
1) unconfigure the whole slot and rebuild all the configs on the blade
2) unconfigure the switch, reboot, and paste the config (minus the
display string command) back in.
3) use another port....

Any other ideas or hints would be appreciated.

Thanks,

J


-----------------------------------------------------------------------
Jeff Hancock				P:	703-846-0161	
Senior Engineer				F: 	703-846-0149
Masergy Communications, Inc.		C:	
2901 Telstar, Ct.				E:
mailto:jeff at masergy.com
Falls Church, VA, 22042			W: 	http://www.masergy.com
-----------------------------------------------------------------------


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/extreme-nsp/attachments/20040115/dcb40187/attachment.html