[e-nsp] Interconnecting Summit 48i and Summit 48si

Nitin Bhagnari nitinbhagnari at yahoo.com
Mon Jul 31 07:18:45 EDT 2006


Hey Mikael,

Thanks for the info. I shall try this and update you.

Thanks.

Nitin

--- Mikael Abrahamsson <swmike at swm.pp.se> wrote:

> On Mon, 31 Jul 2006, Nitin Bhagnari wrote:
> 
> > Hello All,
> >
> > Has anyone ever faced a problem with
> interconnecting
> > the above mentioned switches? There are ports 49
> and
> > 49R on the Summit48i but a single port 49 on the
> > Summit48si and I am not sure how the fibre cables
> may
> > be connected.
> 
> Just ignore the R ports on the 48i. Just connect
> cables from the 48si SFP 
> port to the 48i GBIC port making sure that TX goes
> to RX at the other end, 
> and it should work automatically.
> 
> The R ports are "redundant ports" and are not used
> if there is link on the 
> primary port. So basically the 48i can only have two
> working GBIC ports at 
> any given time.
> 
> -- 
> Mikael Abrahamsson    email: swmike at swm.pp.se
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


More information about the extreme-nsp mailing list