[e-nsp] old Summit48 and 1000BaseT GBIC

[Michael Killermann]

I have also no success in getting an Cisco 1000-BT-Converter running in an Extreme Switch.
I tried an Summit 7i, Alpine and Summit 4 and the only thing that i get is a resetting switch (Summit 7i) but no running gbic.


Michael


> -----Original Message-----
> From: extreme-nsp-bounces at puck.nether.net 
> [mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of 
> Roger Wiklund
> Sent: Friday, February 02, 2007 5:31 PM
> To: Marcin Kuczera
> Cc: extreme-nsp at puck.nether.net
> Subject: Re: [e-nsp] old Summit48 and 1000BaseT GBIC
> 
> 
> Are you sure Extreme supports 1000baseT GBICs?
> 
> I can´t find any 1000baseT GBICs on extremenetworks.com
> 
> Well if it does, it could be a 3d party problem. I´ve had 
> some issues with 
> 3d party GBICs on my Cisco 3750.
> 
> Possible workaround is to use SX/LX-GBIC and connect that to a 
> mediaconverter, fiber->copper. But that´s not really cost 
> efficient, plus 
> it´s another possible source of error.
> 
> On Fri, 2 Feb 2007, Marcin Kuczera wrote:
> 
> > hello,
> >
> > I have a problem with summit48 switch (old one) and 1000BaseT gbic 
> > model
> > (WS-G5483-NW)
> > I'is not original cisco gbic, but comming from the same factory.
> >
> > The problem is that this switch doesn't see the gbic at all, like 
> > there is nothing inside the slot.
> >
> > Is it a common problem for this switch and 1000BaseT Gbics or just 
> > with my one ? Or maybe you can recommend any working with this old 
> > model ?
> >
> > Regards,
> > Marcin
> >
> > _______________________________________________
> > extreme-nsp mailing list
> > extreme-nsp at puck.nether.net 
> > https://puck.nether.net/mailman/listinfo/extreme-nsp
> >
>