[e-nsp] Summit 400-48t Port Problems

[Fabian]

Hi,

 

You have to configure an ip@ to the MGMT VLAN (that have 1 unique port : the
management outband port) :

Configure mgmt ipaddress x.x.x.x/x

 

I would suggest to run a diag on your switch to verify that there is nothing
wrong with the hardware after the power failure.

 

Regards.

 

From: extreme-nsp-bounces at puck.nether.net
[mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of root net
Sent: vendredi 29 août 2008 06:09
To: extreme-nsp at puck.nether.net
Subject: [e-nsp] Summit 400-48t Port Problems

 

Hello,

I have checked the archives from 2003 to now and could not find this
anywhere.  Here is my problem:

I have a Extreme Summit 400-48t lost power for about 5-12 secs (UPS
failure/problem) but powered back on after power was restored and none of
the ports worked.  I have an exact copy of this switch running as well and
it fired back up without a problem unlike this one.

Here are sample logs:

09/26/2007 16:11:34.23 <Erro> <EDP.ProcPDUFail> pdu received on port 2 could
not be processed, checksum error on port 2
09/25/2007 11:10:18.43 <Erro> <EDP.ProcPDUFail> pdu received on port 2 could
not be processed, checksum error on port 2
09/25/2007 10:20:02.55 <Erro> <EDP.ProcPDUFail> pdu received on port 2 could
not be processed, checksum error on port 2
09/24/2007 23:50:41.30 <Erro> <EDP.ProcPDUFail> pdu received on port 2 could
not be processed, checksum error on port 2
09/20/2007 13:43:49.85 <Erro> <EDP.ProcPDUFail

BTW I wiped the config and the time is off now so ignore that.

What do you think is wrong? How can I procure? I thought about reloading the
image but can not use the ports to do a tftp. Can some one explain also how
to configure the management port on the back to do this if possible.  I am a
Cisco person not extreme but I am learning.  

Thanks in advanced!!!

--RootNet08

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20080829/a2a10065/attachment.html>