[e-nsp] vman compatibility

[Laurent HENRY (EHESS/CRI)]

This is not really what i was expecting since i have to find another way
to do what i need but many thanks for your grateful help.


Le Jeu 20 novembre 2008 10:19, Mikael Abrahamsson a écrit :
> On Thu, 20 Nov 2008, Laurent HENRY (EHESS/CRI) wrote:
>
>> What i want to do is enabling vman/qinq on the outside to tunnel my
>> internal vlans ID through my provider network with the 48si and catch it
>> back on another network across my provider's one the same way.
>
> It's not a per port feature on i-chipset, it's per box. So effectively,
> you have to do it at the CPE level if you don't want to change your core,
> so your core uses 0x8100, CPE uses 0x9100, to encapsulate the customer
> 0x8100 traffic (three vlan tags).
>
> This of course means you have to do management of the CPE within the
> provider vlan.
>
>> As it seems,it does not seem possible that way with this i-chip then...
>
> Correct.
>
> --
> Mikael Abrahamsson    email: swmike at swm.pp.se
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
>


-- 
Laurent HENRY
Administrateur Systèmes & Réseaux/RSSI
EHESS - Centre de Ressources Informatiques
54 Boulevard Raspail 75006 Paris
01.49.54.23.61