[e-nsp] 12.5 - nasty feature ?

[Fabian]

Hi Marcin,

This is probably an issue with LACP, change your Load-Sharing config to a
static LAG.

Regards, Fabian.

-----Original Message-----
From: extreme-nsp-bounces at puck.nether.net
[mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of Marcin Kuczera
Sent: mercredi 23 février 2011 12:46
To: extreme-nsp at puck.nether.net
Subject: [e-nsp] 12.5 - nasty feature ?



Look here:


Slot-1 SummitStack-GZE.9 # configure ports 1:19,1:20 auto off speed 1000 
duplex full
Error: Speed change is not allowed on port 1:19 as it is a Trunk member 
port.
Configuration failed on backup MSM, command execution aborted!

Slot-1 SummitStack-GZE.10 # configure ports 1:19-20 auto off speed 1000 
duplex full
Error: Speed change is not allowed on port 1:19 as it is a Trunk member 
port.
Configuration failed on backup MSM, command execution aborted!



I have a configuration where FDX, auto OFF must be configured on trunk 
ports (then I have ADVA STM-16-to-2xGE MUX), they already were 
configured this way, but after an upgrade something wrong happened.

I can't set it up...


Is it some feature or bug ?
Switch - X650


Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp