[e-nsp] 12.5 - nasty feature ?

Marcin Kuczera marcin at leon.pl
Wed Feb 23 16:23:35 EST 2011


Fabian wrote:
> Hi Marcin,
> 
> This is probably an issue with LACP, change your Load-Sharing config to a
> static LAG.

I have no LACP on that link... There is some modyfication between 12.4 
and 12.5 series ?

Regards,
Marcin


> Regards, Fabian.
> 
> -----Original Message-----
> From: extreme-nsp-bounces at puck.nether.net
> [mailto:extreme-nsp-bounces at puck.nether.net] On Behalf Of Marcin Kuczera
> Sent: mercredi 23 février 2011 12:46
> To: extreme-nsp at puck.nether.net
> Subject: [e-nsp] 12.5 - nasty feature ?
> 
> 
> 
> Look here:
> 
> 
> Slot-1 SummitStack-GZE.9 # configure ports 1:19,1:20 auto off speed 1000 
> duplex full
> Error: Speed change is not allowed on port 1:19 as it is a Trunk member 
> port.
> Configuration failed on backup MSM, command execution aborted!
> 
> Slot-1 SummitStack-GZE.10 # configure ports 1:19-20 auto off speed 1000 
> duplex full
> Error: Speed change is not allowed on port 1:19 as it is a Trunk member 
> port.
> Configuration failed on backup MSM, command execution aborted!
> 
> 
> 
> I have a configuration where FDX, auto OFF must be configured on trunk 
> ports (then I have ADVA STM-16-to-2xGE MUX), they already were 
> configured this way, but after an upgrade something wrong happened.
> 
> I can't set it up...
> 
> 
> Is it some feature or bug ?
> Switch - X650
> 
> 
> Regards,
> Marcin
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
> 
> 



More information about the extreme-nsp mailing list