[e-nsp] ExOS CLI commands

[Volodymyr Litovka]

Colleagues, hi

whether it's possible, when working in ExOS CLI, get the following 
information:

like Cisco's CLI, "sh ip route x.x.x.x" shows me the network, to which 
specified IP address belongs and routing information for this network. 
How to get such information in ExOS CLI?
Example:

#sh ip route 85.198.144.5
Routing entry for 85.198.144.0/24
   Known via "bgp 3254", distance 200, metric 0
   Tag 15645, type internal
   Last update from x.x.x.x 11:46:36 ago
   Routing Descriptor Blocks:
   * x.x.x.x, from z.z.z.z, 11:46:36 ago
       Route metric is 0, traffic share count is 1
       AS Hops 3
       Route tag 15645

Thank you

-- 

/doka

Vision without Execution is Hallucination. -- Thomas Edison.