[e-nsp] ExOS CLI commands

[Shankar]

Try "rtlookup"

On Fri, Jul 1, 2011 at 11:07 AM, Volodymyr Litovka <doka at lucky.net> wrote:

> Colleagues, hi
>
> whether it's possible, when working in ExOS CLI, get the following
> information:
>
> like Cisco's CLI, "sh ip route x.x.x.x" shows me the network, to which
> specified IP address belongs and routing information for this network. How
> to get such information in ExOS CLI?
> Example:
>
> #sh ip route 85.198.144.5
> Routing entry for 85.198.144.0/24
>  Known via "bgp 3254", distance 200, metric 0
>  Tag 15645, type internal
>  Last update from x.x.x.x 11:46:36 ago
>  Routing Descriptor Blocks:
>  * x.x.x.x, from z.z.z.z, 11:46:36 ago
>      Route metric is 0, traffic share count is 1
>      AS Hops 3
>      Route tag 15645
>
> Thank you
>
> --
>
> /doka
>
> Vision without Execution is Hallucination. -- Thomas Edison.
>
> ______________________________**_________________
> extreme-nsp mailing list
> extreme-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/extreme-nsp<https://puck.nether.net/mailman/listinfo/extreme-nsp>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20110701/548fc9d4/attachment.html>