[e-nsp] ExOS CLI commands

[Changjie]

You can also try 'show iproute vr vr-xx'
On Jul 1, 2011 1:49 PM, "Shankar" <shankarp5 at gmail.com> wrote:
> Try "rtlookup"
>
> On Fri, Jul 1, 2011 at 11:07 AM, Volodymyr Litovka <doka at lucky.net> wrote:
>
>> Colleagues, hi
>>
>> whether it's possible, when working in ExOS CLI, get the following
>> information:
>>
>> like Cisco's CLI, "sh ip route x.x.x.x" shows me the network, to which
>> specified IP address belongs and routing information for this network.
How
>> to get such information in ExOS CLI?
>> Example:
>>
>> #sh ip route 85.198.144.5
>> Routing entry for 85.198.144.0/24
>> Known via "bgp 3254", distance 200, metric 0
>> Tag 15645, type internal
>> Last update from x.x.x.x 11:46:36 ago
>> Routing Descriptor Blocks:
>> * x.x.x.x, from z.z.z.z, 11:46:36 ago
>> Route metric is 0, traffic share count is 1
>> AS Hops 3
>> Route tag 15645
>>
>> Thank you
>>
>> --
>>
>> /doka
>>
>> Vision without Execution is Hallucination. -- Thomas Edison.
>>
>> ______________________________**_________________
>> extreme-nsp mailing list
>> extreme-nsp at puck.nether.net
>> https://puck.nether.net/**mailman/listinfo/extreme-nsp<
https://puck.nether.net/mailman/listinfo/extreme-nsp>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20110701/86a5c22f/attachment.html>