[e-nsp] DDM and SNMP

[Alexander Shikoff]

On Tue, Jan 17, 2012 at 12:51:38AM +0100, Marcin Kuczera wrote:
> hello,
Hello,
 
> has anyone experience with getting this information via SNMP:
> 
> Slot-1 SummitStack-GZE.4 # show ports 2:7,1:17 transceiver information
> 
> Port      Temp    TxPower  RxPower  TxBiasCurrent  Voltage-Aux1/ 
> Voltage-Aux2
>         (Celsius)   (dBm)    (dBm)     (mA)         Vcc (Volts) 
> (Volts)
> ================================================================================
> 1:17     40.77     -1.71    -3.16     30.39         3.33          N/A
> 2:7      37.96     -0.69    -12.93    26.39         3.32          N/A
> ================================================================================
>              N/A indicates that the parameter is not applicable
>              to the optics connected to the port
> 
> Slot-1 SummitStack-GZE.4 #

You may take a look on latest Extreme's MIB.
http://www.extremenetworks.com/products/mibs.aspx
Though I'm not sure whether you find there proper subtree.
For instance Extreme still has no subtree for monitoring stack ports' utilization.

btw, I have no 'show ports ... transceiver' command on my stack of two X650.
What switches and XOS are you using?

-- 
MINO-RIPE