[e-nsp] DDM and SNMP

[Marcin Kuczera]

Alexander Shikoff wrote:
> On Tue, Jan 17, 2012 at 12:51:38AM +0100, Marcin Kuczera wrote:
>> hello,
> Hello,
>  
>> has anyone experience with getting this information via SNMP:
>>
>> Slot-1 SummitStack-GZE.4 # show ports 2:7,1:17 transceiver information
>>
>> Port      Temp    TxPower  RxPower  TxBiasCurrent  Voltage-Aux1/ 
>> Voltage-Aux2
>>         (Celsius)   (dBm)    (dBm)     (mA)         Vcc (Volts) 
>> (Volts)
>> ================================================================================
>> 1:17     40.77     -1.71    -3.16     30.39         3.33          N/A
>> 2:7      37.96     -0.69    -12.93    26.39         3.32          N/A
>> ================================================================================
>>              N/A indicates that the parameter is not applicable
>>              to the optics connected to the port
>>
>> Slot-1 SummitStack-GZE.4 #
> 
> You may take a look on latest Extreme's MIB.
> http://www.extremenetworks.com/products/mibs.aspx
> Though I'm not sure whether you find there proper subtree.
> For instance Extreme still has no subtree for monitoring stack ports' utilization.
> 
> btw, I have no 'show ports ... transceiver' command on my stack of two X650.
> What switches and XOS are you using?

ExtremeXOS version 12.5.4.5 v1254b5-patch1-4 by release-manager
x650-24x (first hardware release)

You need original 10G modules or some that behave as originals.
I finally found a method to make my ones looking like extreme's ;)

It DOES NOT work for 1G modules... that is difficult to understand why 
they didn't implement it, it is the same API as for SFP+ modules.

Regards,
Marcin