[e-nsp] Port not present na 480-24x

[Michał Margula]

W dniu 29.06.2012 10:26, Michał Margula napisał(a):
> It happens after clearing out config, I tried also unconfigure 
> stacking,
> disable stacking and so on (but there is no word about stacking in
> config). We are using OEM XFPs. We also have another switch, same 
> model,
> which works just fine. Swapping XFPs between them didn't change 
> anything.
>
> I appreciate your help,
>
> Thanks!

OK I found a solution. I had to disable stacking by disable 
stacking-support. Funny thing that we have never enabled it (but it was 
bought from test lab, so maybe they did) and there was no sign of that 
command in config.

Also previously I have tried disable stacking and unconfigure stacking, 
but only disable stacking-support solved that.

Thanks!

-- 
Michał Margula, alchemyx at uznam.net.pl, http://alchemyx.uznam.net.pl/
"W życiu piękne są tylko chwile" [Ryszard Riedel]