[e-nsp] Problems using LACP-Trunks on X670 in a stack

[Robert Kerr]

On 07/03/13 15:02, Chris Hellkvist wrote:

>  The device behind this trunk is a HP Procurve switch, the config of
> the device is fine and also works when connected to other devices
> (LACP is working and building the trunk group when used with a Cisco
> or Brocade Box).
> 
> Anybody experienced similar problems?

No such problems - we have X670V stacks with LACP to HP procurve working
fine in several locations (though no brocade). I would focus on the HP
side, double check the configuration and logs there.

-- 
 Robert Kerr