[e-nsp] snmp problem

[Pedro Serotto]

On 2013-05-10 10:57, Pedro Serotto wrote:

hi all,
>I have a couple of x670 in stack, I set up snmp, but sometimes it not answer to my monitor tool (cacti). Does someone has a similiar issue ?
>
Check CPU load.
If you have high bcm_RX or something, than you have a lot of traffic
    towards CPU that may cause this behaviour.

We had this problem because on one VLAN we have around 800Mbit/s of
    ethernet broadcasts (specyfic traffic - mirror from router forwarded
    towards vlan).

This (broadcast to CPU even if VLAN is L2 only) is a bug admitted by
    extreme, will be corrected one day ;)
In meantime we have a filter that blocks broadcasts to go to CPU on
    that vlan.

Regards,
Marcin


Hi, tnx for your answer, but I have non traffic on on these devices. I have only switch they on.

:-(

BR

Pedro
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20130515/17adec62/attachment.html>