[F10-nsp] bpdu pass-through

[Ron Lewkiewicz]

Your observation is correct. Current behavior is to consume the BPDUs in
the situation you describe.

There currently is no option to change this behavior.

Hope this helps.

-Ron

o k wrote:
>
> Hi,
>
> When STP is disabled on E-Series, the box seems to discard the BPDUs
> received on it's interfaces(layer 2 switch port mode).
> Can I configure the box to pass through (flood) the multicast destined
> for
> mac address "01:80:c2:00:00:00"?
>
> [bridge]---BPDU(A)--> gi1/0 [E-series(STP disabled)] gi1/1 ---BPDU(A)--->
>
> #show cam mac linecard 0 port-set 0
> :
> Index Table ID VlanId Mac Address Region Interface
> :
> 28668 0 0 01:80:c2:00:00:00 BLACKHOLE 01c05
> :
>
> TIA
>
> _________________________________________________________________
> 無料で250MBの受信ボックスが使える「MSN Hotmail」
> http://promotion.msn.co.jp/hotmail/
>
> _______________________________________________
> force10-nsp mailing list
> force10-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/force10-nsp
>