[F10-nsp] bpdu pass-through

[o k]

Ron,

So, I will enable STP on the E-box.

Thanks!


>From: Ron Lewkiewicz <ron.nsp at force10networks.com>
>Reply-To: ron.nsp at force10networks.com
>To: o k <fungk124_2hot at hotmail.co.jp>
>CC: force10-nsp at puck.nether.net
>Subject: Re: [F10-nsp] bpdu pass-through
>Date: Fri, 16 Dec 2005 13:39:33 -0800
>
>Your observation is correct. Current behavior is to consume the BPDUs in
>the situation you describe.
>
>There currently is no option to change this behavior.
>
>Hope this helps.
>
>-Ron
>
>o k wrote:
> >
> > Hi,
> >
> > When STP is disabled on E-Series, the box seems to discard the BPDUs
> > received on it's interfaces(layer 2 switch port mode).
> > Can I configure the box to pass through (flood) the multicast destined
> > for
> > mac address "01:80:c2:00:00:00"?
> >
> > [bridge]---BPDU(A)--> gi1/0 [E-series(STP disabled)] gi1/1 
---BPDU(A)--->
> >
> > #show cam mac linecard 0 port-set 0
> > :
> > Index Table ID VlanId Mac Address Region Interface
> > :
> > 28668 0 0 01:80:c2:00:00:00 BLACKHOLE 01c05
> > :
> >
> > TIA
> >
> > _________________________________________________________________
> > 辟。譁吶〒250MB縺ョ蜿嶺ソ。繝懊ャ繧ッ繧ケ縺御スソ縺医ｋ縲勲SN Hotmail縲・> > 
http://promotion.msn.co.jp/hotmail/
> >
> > _______________________________________________
> > force10-nsp mailing list
> > force10-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/force10-nsp
> >

_________________________________________________________________
迷惑メールやウイルスへの対策も万全「MSN Hotmail」 
http://promotion.msn.co.jp/hotmail/