[F10-nsp] Swapping Switch to Force10

Kabayan kab4yan at yahoo.com
Wed Oct 27 06:15:00 EDT 2010


I saw extreme configuration, and i didn't found redundancy configuration between two switches. I have guess that the redundancy controlled by PE router because there are twin PE routers too.
I just found that 2 ports at SW1 connect to 2 ports at SW2
Here the simple topology

PE ROUTER1       PE ROUTER2
    |                 |
    |                 |
   SW1 --------------SW2

# Load Sharing Configuration
enable sharing Y:XX grouping Y:XX,Y:XX algorithm port-based
configure lacp keep-alive 10

thx
Kabayan





--- On Mon, 10/25/10, Nemeth Laszlo <csirek at cooler.hu> wrote:

> From: Nemeth Laszlo <csirek at cooler.hu>
> Subject: Re: [F10-nsp] Swapping Switch to Force10
> To: force10-nsp at puck.nether.net
> Date: Monday, October 25, 2010, 6:20 AM
> Hi
> 
> What is Your redundancy protocol that You are using now
> between Your 
> extreme switches?
> 
> Laca
> _______________________________________________
> force10-nsp mailing list
> force10-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/force10-nsp
> 


      


More information about the force10-nsp mailing list