[f-nsp] Measurement of BigIron virtual interfaces

[Jonas Frey]

Hi,

please bare in mind: sflow is only supported on the jetiron m4 boards,
not on the (old) ironcore ones. 
I dont know about ve monitoring/accounting.

Btw, i got some foundry equipment to sell...if anyone is interessted:
B2P622-SM-IR
M4R4G (somehow defective, tends to crash when running bgp/using alot of
routes)


Regards,
Jonas

On Mon, 2004-10-25 at 18:57, Cliff Fogle wrote:
> NTOP kind of has sflow support.  It really only gives 'top talkers'
> info.  The best thing out there at this time is really InMon's traffic
> server:
> 
> http://www.inmon.com/products/trafficserver.php
> 
> (warning:  There is a free demo avaialble and it's addictive)
> 
> Foundry is apparently building much better sflow support into INM 1.8,
> but I have yet to see anything other than a PowerPoint mock up of it.
> 
> -----Original Message-----
> From: foundry-nsp-bounces at puck.nether.net
> [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Sam Stickland
> Sent: Monday, October 25, 2004 6:47 AM
> To: foundry-nsp at puck.nether.net
> Subject: [f-nsp] Measurement of BigIron virtual interfaces
> 
> Hi,
> 
> Is it possible to measure the virtual interface bandwidth stats on the
> BigIrons (Mmgt4)? I notice that the interface OID's appear to be
> readable but the counters never seem to increment (running 07.7.01T53)
> 
> Can this information be read via SNMP. If not, a cursorsy glance at the
> sFlow specs seems to suggest is it possible to measure this information
> using sFlow. If so are there any opensource or reasonably lightweight
> tools that can process the information in this regard?
> 
> Thanks,
> 
> Sam
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
> 
> 
> 
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp