[f-nsp] password break on fast iron 2

[Brent Van Dussen]

I'll take it if yer giving it away :)

To break the password you need to send a break sequence to the console on 
bootup and then at the boot prompt issue the no password command to boot up 
without a password set.

-Brent


At 10:06 AM 9/28/2004, Mike Carter wrote:
>Hello all,
>
>We just got a Fast iron2 as part of a Cisco package we brought in.  My
>Technician is not able to break the password on this system.  I Googled it
>and looked thru the archives with little success...is there a simple way to
>break the password?  Also wondering if there is even any market for
>these...this one has (1) F18GMR and (3) F124E's.  Maybe we skip the password
>break and toss this in the dumpster??????
>
>TIA
>
>
>
>Michael Carter
>Major Account Manager
>Alta Technologies, Inc
>763-475-5327  (direct)
>800-546-2582  (Ext. 327)
>763-475-5331 (fax)
>AIM  mikec at alta
>mike.c at altatechnologies.com
>www.altatechnologies.com
>SUN CISCO RS/6000 HP-UX OVERLAND STORAGE
>JNI EMULEX Qlogic
>
>
>_______________________________________________
>foundry-nsp mailing list
>foundry-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/foundry-nsp