[f-nsp] NI4GMR <-> B4GMR4

Gerald Krause gk at ax.tc
Thu Aug 25 06:50:51 EDT 2005


Am Donnerstag, 25. August 2005 12:15 schrieb Stephen J. Wilcox:
> i dont think thats true..
>
> you can definitely run BI code on NI but i dont think a BI will boot on
> NI code.

That is what I have in my mind too. 

> i believe this is a forced software restriction (ie you want the NI extra
> feature, you need to pay for one)
>
> heres BI on NI:
>   SW: Version 09.1.02eT53 Copyright (c) 1996-2003 Foundry Networks, Inc.
>       Compiled on Aug 18 2004 at 15:13:51 labeled as B2P09102e
>       (2893862 bytes) from Primary b2p09102e.bin
>   HW: Stackable NI4802, SYSIF version 21, Serial #: Non-exist
>
> Steve

I have this oputput:

NetIron Router#sho ver
  SW: Version 07.8.00aT53 Copyright (c) 1996-2004 Foundry Networks, Inc.
      Compiled on Oct 04 2004 at 16:42:07 labeled as B2R07800a
      (3636356 bytes) from Primary B2R07800a.bin
  HW: NetIron 400 Router, SYSIF version 21, Serial #: Non-exist
=========================================================================
 SL 1: B4GMR4 M4 Management Module, SYSIF 2, M4, ACTIVE
      Serial #: Non-exist
 8192 KB BRAM, SMC version 1, BM version 21
  512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA  0, version 0209
  512 KB PRAM(512K+0K) and shared CAM entries for DMA  1, version 0209
=========================================================================

But the Module in slot 1 is labeled as "NI4GMR". Strange.


 --Gerald



More information about the foundry-nsp mailing list