[f-nsp] help to ServerIronXL Hot Standby SLB

[Carlos Vergara]

Hi,

I have 2 ServerIronXL in Hot Standby SLB mode, this work fine, but i
detected lost packet (ping) to the ServerIron-backup's management IP
address. I don´t see this lost to the ServerIron-Active.

Each Serveriron is connected to two switches Cisco 3560 (2 Uplink) and
between these Cisco switches there is a connection too, STP is blocking the
L2 loop on a 3560.

3560---------3560
|    \____---/      |
SI-------/  \-------SI(backup)

I checked the all links, if I shutdown an Uplink on the serveriron-backup I
don´t see lost packet.

Can anybody help me ?

regard,
Carlos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20051226/6a9d093e/attachment.html>