[f-nsp] Problems configuring url-maps on ServerIron XL

[Matti Kari]

Hello,

we have a ServerIron XL running 07.5.00T12. Everything else seems to be 
working fine, except that I'm unable to configure a chani of url-maps, 
as described on the manual.

Clip from config:

url-map charttool
method prefix
default 1
match "/charttool/" 3
!
url-map addpic
method prefix
default 1
match "/addpic.php" 2

What I would need to do is to continue from "charttool" to "addpic". 
However, when I try to enter "default addpic", I just get an error:

telnet at hevi(config-url-charttool)#default "addpic"
Invalid input -> "addpic"
Type ? for a list
telnet at hevi(config-url-charttool)#default
   DECIMAL   Group ID [0-1023]

Software versions:

telnet at hevi#sh ver
  SW: Version 07.5.00T12 Copyright (c) 1996-2002 Foundry Networks, Inc.
      Compiled on Mar 17 2005 at 12:08:20 labeled as SLB07500
      (1570406 bytes) from Secondary SLB07500.bin
  HW: ServerIron Switch, serial number 63be17
  400 MHz Power PC processor 740 (revision 8) with 32756K bytes of DRAM
   16 100BaseT interfaces with Level 1 Transceiver LXT975
    2 GIGA Copper uplink interfaces

I tried the same with v. 07.4.01 before and had the same problem (that's 
why I upgraded).

Any ideas? A quick answer is appreciated.

-- 
Matti Kari - consultant - e-mail: maza at maza.fi
gsm: +358 40 838 6607  -  web: http://maza.fi/
snail:  Wallininkatu 7 C 82, FI-00530 Helsinki