[f-nsp] dot1x auth on a fastiron edge 4802 poe

[Mike Allen]

Alex, not sure how much this will help, but one thing I usually try is
to set up the login or enable authentication to use radius as well. 
This is pretty simple, and will tell you whether the problem is
happening specifically with Radius, or with the dot1x.

Mike

On Thu, 03 Mar 2005 14:26:25 +0000, Alex Sharaz <A.Sharaz at hull.ac.uk> wrote:
> Chaps,
> 
> Anyone using dot1x on the above beast? I seem to be wading through mud
> trying to get this to work.
> 
> Up till yesterday, when i was running vsn 3301a of the software, all i
> could get working was a WinXP pc configured to use dot1x with MD5-Challenge.
> 
> This morning, having upgraded to Vsn 3301b of the software I can now get
> peap/mschapv2 working..
> 
> The problem is that the 4802 seems to be losing its connection with the
> radius server. if, after a given period of time I disable/enable the
> ethernet interface on the pc, I can type in my userid /password till the
> cows come home. You don't see any traffic at the radius server.
> 
> if I power cycle the 4802 bang, it's straight in there.
> 
> Anyone else seen this sort of things?
> 
> Alex
> 
> Sent using Mulberry 3.1.2
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>