[f-nsp] Source-Based-Routing on a BI 4000

[Gunther Stammwitz]

Hello colleagues,
 
I'm trying to get source based routing running on a BI 4000 with
jetcore-modules:
 
My config seems to be correct - at least this would work on a cisco. 
Could anyone tell me please, what's wrong of if there's something I should
have paid attention to?

Thanks,
Gunther
 

My config:
ip prefix-list dummy seq 5 permit 1.2.3.4/32 
 
route-map  dummy permit  5 
 match ip route-source prefix-list dummy
 set ip next-hop 212.211.254.85 
 
interface ve 200
 ip policy route-map dummy

fyi: SW: Version 07.8.00dT53