AW: [f-nsp] Source-Based-Routing on a BI 4000

[Gunther Stammwitz]

Hello Brent,

Thanks for the tip but that didn't work.

Even a route-map that matches everything (no match at all) doesn't work:

route-map  dummy permit  5 
 set ip next-hop 212.211.254.85  




Any ideas?? Maybe we're encountering a bug here?

Best regards,
Gunther

> -----Ursprüngliche Nachricht-----
> Von: Brent Van Dussen [mailto:bvd at att.com] 
> Gesendet: Montag, 9. Mai 2005 20:38
> An: Gunther Stammwitz
> Betreff: Re: [f-nsp] Source-Based-Routing on a BI 4000
> 
> Maybe try switching to an access-list from a prefix-list to 
> see if that helps?
> 
> -Brent
> 
> At 04:31 PM 5/8/2005, you wrote:
> >Hello colleagues,
> >
> >I'm trying to get source based routing running on a BI 4000 with
> >jetcore-modules:
> >
> >My config seems to be correct - at least this would work on a cisco.
> >Could anyone tell me please, what's wrong of if there's something I 
> >should have paid attention to?
> >
> >Thanks,
> >Gunther
> >
> >
> >My config:
> >ip prefix-list dummy seq 5 permit 1.2.3.4/32
> >
> >route-map  dummy permit  5
> >  match ip route-source prefix-list dummy
> >  set ip next-hop 212.211.254.85
> >
> >interface ve 200
> >  ip policy route-map dummy
> >
> >fyi: SW: Version 07.8.00dT53
> >
> >_______________________________________________
> >foundry-nsp mailing list
> >foundry-nsp at puck.nether.net
> >http://puck.nether.net/mailman/listinfo/foundry-nsp
> 
>