[f-nsp] About LACP interoperability

[Hiromasa Sekiguchi]

Hi all,

Thank you for your help.

I try the following tests.
But all tests is fail...

1. add "channel-protocol lacp" command

    -> fail...

2. The LACP mode changed active/passive Cisco and Foundry.

    - Cisco is active, Foundry is active

      -> fail...

    - Cisco is active, Foundry is passive

      -> fail...

    - Cisco is passive, Foundry is active

      -> fail...

I have no more ideas...

Are there any ideas???

Regards,
Hiromasa


Hiromasa Sekiguchi wrote:
> Hi all,
> 
> I try chennel connection between Cisco and Foundry.
> 
> The host is the following.
> Cisco : cat3750
> Foundry : FWS4802-PREM
> 
> +---------+ gi2/0/1         e49 +--------------+
> | cat3750 |=====================| FWS4802-PREM |
> +---------+ gi2/0/2         e50 +--------------+
> 
> ### cat3750 ###
> interface gigabitethernet 2/0/1
>   switchport access vlan ***
>   switchport mode access
>   channel-group 1 mode active
> 
> interface gigabitethernet 2/0/2
>   switchport access vlan ***
>   switchport mode access
>   channel-group 1 mode active
> ###
> 
> ### FWS4802-PREM ###
> interface ethernet 49
>  link-aggregate configure key 20000
>  link-aggregate active
> 
> interface ethernet 50
>  link-aggregate configure key 20000
>  link-aggregate active
> ###
> 
> When gi2/0/1(or e49) was down, gi2/0/2 was flapped.
> It occur about 90 sec later.
> 
> Are there any solution?
> 
> Please help!!!
> 
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp