[f-nsp] VRRP problem

[Brent Van Dussen]

Also, seems odd that Switch-2 has a dead-interval of 0, perhaps a nuance of 
the particular code running on there.  Try upping that dead interval to 
something like 5 seconds.

-Brent

At 11:58 AM 5/30/2006, barney gumbo wrote:

>switch-2#sho ip vrrp
>Total number of VRRP routers defined: 1
>Interface ethernet v3
>  auth-type no authentication
>  VRID 3
>   state master
>   administrative-status enabled
>   mode non-owner(backup)
>   priority 100
>   current priority 100
>   hello-interval 1 sec
>   dead-interval 0 sec
>   current dead-interval 3.600 sec
>   preempt-mode true
>   ip-address <http://192.168.101.2/>192.168.101.2
>   advertise backup: disabled
>   next hello sent in 00:00:00
>switch-2#