[f-nsp] foundry-nsp Digest, Vol 44, Issue 8

[Mike Allen]

Jason, sorry, meant to get back to you sooner.  No, it has a much larger
ternary cam, and does the FDR (pre-population of the cam) as well.  But keep
in mind that this is an enterprise box, in terms of total numbers of routes,
etc.

Mike

On 9/18/06, Jason J. W. Williams <jasonjwwilliams at gmail.com> wrote:
>
> Hi Mike,
>
> Does the SuperX suffer from the same problems as JetCore the in terms
> of the routing/CAM discussion going on?
>
> Best Regards,
> Jason
>
> On 9/18/06, Mike Allen <mkallen at gmail.com> wrote:
> >
> > Hi Jason,
> >
> > No, its not.  SuperX uses one specific chipset and software, Terathon
> refers
> > to the MG8/NI40G.  The newer MLX/XMR family is the next generation of
> > Terathon hardware.  The SuperX is more of an enterprise box, in terms of
> > features and densities.
> >
> >
> > Mike
> >
> >
> > On 9/18/06, Jason J. W. Williams <jasonjwwilliams at gmail.com> wrote:
> > >
> > Niels et. al,
> >
> > Is the chipset in the new SuperX gear (as well as the MG8/newer
> > NetIron gear) using Terathon?
> >
> > -J
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp at puck.nether.net
> >  http://puck.nether.net/mailman/listinfo/foundry-nsp
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20060922/f502d65d/attachment.html>