[f-nsp] Multi-module trunk group

[Daniel]

Guten Tag Andrea,

am Freitag, 17. August 2007 um 18:06 schrieben Sie:

> For redundacy reason I'd like to put in trunk group two ports in
> different module, but the command is always rejected, example

> slot 2 - 24 sfp module with 1000sx sfp (RX-BI-24F)
> slot 6 - 24 sfp module with 1000sx sfp (RX-BI-24F)

> command:
> telnet at bigiron(config)#trunk eth 2/7 to 6/1
> error - one port range must be within one module

My idea is to configure it as the following:

Trunk on 1/1 to 1/2 and 2/1 to 2/2
Same on the other switch/router

And use only spanning tree for example.
Maybe other ways should be working too.


-- 
Mit freundlichen Grüßen
Daniel
mailto:daniel at ipv6-network.de