[f-nsp] ServerIron - Logging Source IP at Server Level

[christian]

Thanks for the help guys, much appreciated!



On 8/10/07, Adam Waite <awaite at pandora.com> wrote:
>
> There's 3 ways to do this:
>
> 1. Turn off Source NAT in the config (this requires the real servers to
> have routeable ip addresses)
> 2. Use DSR mode instead of full proxy mode
> 3. Turn on client-ip header insertion on the LB and run a plugin on the
> webserver to extract the header and use it in the logs. The syntax for
> this is "port http request-insert client-ip" in the virtual server config.
>
> Adam Waite
> Sr Network Engineer
> Pandora Media
>
> christian wrote:
> > Hi All,
> >
> > I am looking for a way to configure my LB so that in my web server
> > logs, I can see the actual client IP's hitting my site and not the
> > Load Balancer's IP
> >
> > Can anyone tell me what I would do to configure this and if it is
> > possible?
> >
> > Im new to foundry, and have been a an F5 guy, so my apologies if this
> > is something easy
> >
> > Thanks!
> >
> > Christian
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20070810/a39d2404/attachment.html>