[f-nsp] Multi-module trunk group

[Andrea]

Hi,

On 17/08/07, Asoka De Saram <adesaram at yahoo.com> wrote:
> Yes, it can be done.
> Here is the proper syntax to configure a two port cross module trunk.
>
> telnet at BigIron RX-8 Router(config-if-e1000-2/7)#trunk e 2/7 to 2/7 ethernet 6/1 to 6/1
> Trunk transaction done.

It worked greatly, thanks a lot!
I find this syntax a bit confusing, don't you?

Bye
Andrew