[f-nsp] Foundry ServerIron - source-nat

[Gaurav Sabharwal]

Attached is the running configuration. The VIP www.test.dk is not 
working. It starts working as soon as I add the source-nat to the real 
servers that are part of the VIP.

In production all the IP addresses are public IP addresses.

Thanks,
- Gaurav
on 11/01/2007 09:47 PM Raja Subramanian said the following:
> On 11/2/07, Gaurav Sabharwal <gaurav at inwire.net> wrote:
>> When we disable source-nat for the real servers, no traffic hits the
>> real server at all. I tried to "debug ip tcp IP.Add.of.Server" on the SI
>> but can't seem to get an debug messages on the screen. debug console is
>> enabled.
> 
> When you disable soure-nat, is the SI still able to health check your real
> servers?  What is your "show server sessions" output?
> 
> Post full output of your "show run" if possible, it's difficult
> troubleshoot without
> the full picture.
> 
> - Raja
> 

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lb.txt
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20071102/3845733e/attachment.txt>