[f-nsp] Verbose logging on NetIron XMR

[David Ball]

  Cancel that.  Turns out you can't see much 'console' debug logging
when you're SSH'D to the damned box.  Fixed via 'debug dest ssh 1'.

David


On 08/04/2008, David Ball <davidtball at gmail.com> wrote:
>   Hi there....me again.  Am currently troubleshooting some (apparent)
> problems in getting RSVP LSPs to come up between an XMR4000 and a
> Juniper T-series.  I can't for the life of me get any sort of verbose
> logging for mpls/rsvp working on the XMR though.  Logging appears all
> enabled fully:
>
> SSH at lab-xmr2#sho log
> Syslog logging: enabled (0 messages dropped, 0 flushes, 1 overruns)
>     Buffer logging: level ACDMEINW, 50 messages logged
>     level code: A=alert C=critical D=debugging M=emergency E=error
>                 I=informational N=notification W=warning
>
>   and all debugging is turned on as well (via 'debug all', 'terminal
> monitor' in EXEC mode).  I'm still seeing nothing dumped to console
> though (should be seeing the Juniper trying to establish an LSP to the
> XMR, and similar from the XMR to the Juniper).  Opened a ticket via
> knowledge portal, and they say it's not possible to turn on such
> logging ?!?  Say it ain't so....
>
> David
>