[f-nsp] Verbose logging on NetIron XMR

[Logan Rawlins]

On this platform you need to tell it where to send the debug output.   
show telnet or ssh see which session on you are on the debug  
destination telnet 1   as an example.


On Apr 8, 2008, at 12:56 PM, David Ball wrote:

>  Hi there....me again.  Am currently troubleshooting some (apparent)
> problems in getting RSVP LSPs to come up between an XMR4000 and a
> Juniper T-series.  I can't for the life of me get any sort of verbose
> logging for mpls/rsvp working on the XMR though.  Logging appears all
> enabled fully:
>
> SSH at lab-xmr2#sho log
> Syslog logging: enabled (0 messages dropped, 0 flushes, 1 overruns)
>    Buffer logging: level ACDMEINW, 50 messages logged
>    level code: A=alert C=critical D=debugging M=emergency E=error
>                I=informational N=notification W=warning
>
>  and all debugging is turned on as well (via 'debug all', 'terminal
> monitor' in EXEC mode).  I'm still seeing nothing dumped to console
> though (should be seeing the Juniper trying to establish an LSP to the
> XMR, and similar from the XMR to the Juniper).  Opened a ticket via
> knowledge portal, and they say it's not possible to turn on such
> logging ?!?  Say it ain't so....
>
> David
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>