[f-nsp] Foundry gear for doing basic NAT and Layer 3 functionality?

[Lazuardi Nasution]

Hi Justin,

Thank you for your update. I need some sample scripts for doing that.
I have not been doing NAT by using ACL before on FES.

Best regards,

On Sun, Apr 20, 2008 at 5:11 AM, Justin Ream <justin.ream at tierzero.com> wrote:
> On 4/19/08 1:19 AM, "Lazuardi Nasution" <mrxlazuardin at gmail.com> wrote:
>
> > Hi,
> >
> > Any answer for following quaestion ? I need the answer too.
> >
> > Best regards,
> >
>
> Hi Lazuardi -
>
> Someone on the list offered up the ServerIron solution.  This is not a bad
> way to go, but I thought about it for a second, and I'm not going to want
> any NATing for sip  The second solution that was suggested to me was just
> use inbound ACLs on this FastIron Edge X424 and assign my other interfaces
> on the box a public IP address.  Though there is a lack of outbound ACLs on
> this gear, this should be sufficient to get me going.
>
> If I was reading correctly, I think you can get NAT on the PREM designated
> boxes with the full Layer 3 code.  Don't quote me on that, though.
>
> -Justin
>
>