[f-nsp] CAM SNMP OID's not working

[Jeroen Wunnink]

Hello,

We recently aquired some Bigiron 4000 Jetcore routers to replace our 
ironcores due to CAM running out on the L3 level. To monitor CAM 
usage I'm now trying to read out the stats of the CAM tables through 
SNMP, but I'm not having much luck. I've been mailing with tech 
support too, they've been very supportive on finding why this doesn't 
work, but they can't find a reason on why I can't read out the OID's 
on our new routers.

The management blades we're using are J-BxGC16 blades (the 8-port 
mini gbic blades)

All I keep getting is:
[jeroenwu at linux_jeroen jeroenwu]$ snmpwalk -v 2c -m 
foundry/B2R08001a-MIB.txt -c public 10.100.100.125 .1.3.6.1.4.1.1991.1.1.2.12.2
FOUNDRY-SN-AGENT-MIB::snCAMIpStatTable
FOUNDRY-SN-AGENT-MIB::snCAMIpStatTable = No Such Object available on 
this agent at this OID


This is very consystent, on all three (same hardware) Bigirons this 
doesn't work nor does it on two older ironcore Bigirons that have a 
M4RZG management blade (The one with no ports, just 2 flash slots).

But it DOES work on two other ironcore management blades I have 
(M4R4G, the one with 8 Gbic slots):

[jeroenwu at linux_jeroen jeroenwu#  snmpwalk -v 2c -m 
mib/B2R08001a-MIB.txt -c public 10.100.100.125 .1.3.6.1.4.1.1991.1.1.2.12.2
FOUNDRY-SN-AGENT-MIB::snCAMIpStatIfIndex.1.1 = Gauge32: 1
FOUNDRY-SN-AGENT-MIB::snCAMIpStatIfIndex.1.2 = Gauge32: 1
FOUNDRY-SN-AGENT-MIB::snCAMIpStatIfIndex.1.3 = Gauge32: 1
FOUNDRY-SN-AGENT-MIB::snCAMIpStatIfIndex.2.1 = Gauge32: 2
etc..

So I'm a bit puzzled here on why this won't work on the others, any ideas ?





Met vriendelijke groet,

Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
systeembeheer at easyhosting.nl

telefoon:+31 (035) 6285455              Postbus 48
fax: +31 (035) 6838242                  3755 ZG Eemnes

http://www.easyhosting.nl
http://www.easycolocate.nl