[f-nsp] Problem doing gencsr

[Oliver Adam]

I have missed the "ssl card" statement in you first email - ups...


R, Oliver


At 15:02 25.07.2008, Rantanen, Edward CTR wrote:
>After trouble shooting (playing around) figured how the cards 
>interact with the software along their unique sets of commands.
>
>The commands act/re-act differently when ran from management card 
>vs. the SSL card.
>
>The management card does not echo, ssl out-put the same as the ssl 
>card itself. When I did an rconsole into the ssl card I was able to 
>see the error on the commands, or when doing a clear on the 
>key/certs the echo'd from the flash would show.
>
>
>
>Tks Oliver for assist.
>
>-----Original Message-----
>From: oadam at madao.de [mailto:oadam at madao.de]
>Sent: Friday, July 25, 2008 2:38 AM
>To: Rantanen, Edward CTR; foundry-nsp at puck.nether.net
>Subject: Re: [f-nsp] Problem doing gencsr
>
>I had a look at it and you are not supposed to use a password with 
>the gencsr command. That is how you should do it:
>
>SLB-ServerIron 4G#
>SLB-ServerIron 4G#ssl genrsa RUN 1024 pass
>SLB-ServerIron 4G#ssl gencsr RUN
>You are about to be asked to enter information that will be 
>incorporated into your certificate request. What you are about to 
>enter is what is called a Distinguished Name or a DN.
>Country name (2 letter code) [US]
>State or province (full name) [California]
>Locality name (city)  [San Jose]
>Organization name (Company name) [Foundry Networks]
>Organizational unit name (department) [Web administration]
>Common name (your domain name) [ www.foundrynet.com 
><http://www.foundrynet.com/> ]
>Email address [webadmin at foundrynet.com]
>
>Please try this.
>
>Cheers,
>
>Oliver
>
>At 19:09 24.07.2008, Oliver Adam wrote:
>
>
>         This looks like a bug to be honest - have you tried 
> software release 10.2.00? I am going to check 10.2.01 tomorrow and 
> I will let you know about the results.
>
>         R, Oliver
>
>         At 20:46 23.07.2008, Rantanen, Edward CTR wrote:
>
>
>                 I am having a problem generating a csr, running 
> 10201b on an SI 450 with an ssl module.
>
>
>                 #ssl genrsa testkey 1024 foundry123 -> works fine
>
>                 But when trying to do a:
>
>                 #ssl gencsr testkey foundry123 -> the command does 
> not show an error, but it shows another # for the next line with 
> nothing further.
>
>                 This is being done with a serial cable into a 
> laptop with hyperterm.
>
>
>                 Any help would be appreciated.
>
>                 Ed
>
>                 _______________________________________________
>                 foundry-nsp mailing list
>                 foundry-nsp at puck.nether.net
>                 http://puck.nether.net/mailman/listinfo/foundry-nsp 
> <http://puck.nether.net/mailman/listinfo/foundry-nsp>
>
>
>
>         _______________________________________________
>         foundry-nsp mailing list
>         foundry-nsp at puck.nether.net
>         http://puck.nether.net/mailman/listinfo/foundry-nsp 
> <http://puck.nether.net/mailman/listinfo/foundry-nsp>