[f-nsp] LDAPS debuging

[Mike Lott]

Hi Oliver

Thanks for the reply.

I've tried the following commands, but when I make HTTPS connections  
or LDAPS connections to the ServerIron, nothing is output to the  
console, but my HTTPS sessions are fine (in that they complete):

1/1#wsm dm ssldump filter 1 spa 10.0.1.160 (my IP)
1/1#wsm dm ssldump mode detail
1/1#wsm dm ssldump both

I've verified that the active BP is in slot 1 and we only have WSM  
modules with one processor. I'd expect to see something being written  
out as there are a number of active SSL connections at the time from  
my IP address.

We are currently using 09.5.02cTD2.

Thanks,

Mike

On 20 Jun 2008, at 08:23, Oliver wrote:

> Have you checked rconsole commands like
>
> wsm dm ssldump bried
> wsm dm ssldump detailed
> wsm dm ssldump decrypt
>
> and some others? Have a look at the Security Guide of TrafficWorks  
> 10.2.01 or 10.2.00...
>
> You have to move to the correct processor first of all (rconsole x y).
>
> X = slot
> Y = processor
>
> R, Oliver
>
>
>
> At 09:06 20.06.2008, Mike Lott wrote:
>> on the ServerIron before moving my
>> eyes to the backend servers. Any clues?
>