[f-nsp] LDAPS debuging

[Oliver Adam]

What type of traffic are you trying to debug? Is it traffic which is 
using SSL acceleration at the ServerIron or is it something else? The 
command below is for SSL accelerated traffic only.

R, Oliver

At 12:48 20.06.2008, Mike Lott wrote:
>Hi Oliver
>
>Thanks for the reply.
>
>I've tried the following commands, but when I make HTTPS connections
>or LDAPS connections to the ServerIron, nothing is output to the
>console, but my HTTPS sessions are fine (in that they complete):
>
>1/1#wsm dm ssldump filter 1 spa 10.0.1.160 (my IP)
>1/1#wsm dm ssldump mode detail
>1/1#wsm dm ssldump both
>
>I've verified that the active BP is in slot 1 and we only have WSM
>modules with one processor. I'd expect to see something being written
>out as there are a number of active SSL connections at the time from
>my IP address.
>
>We are currently using 09.5.02cTD2.
>
>Thanks,
>
>Mike
>
>On 20 Jun 2008, at 08:23, Oliver wrote:
>
>>Have you checked rconsole commands like
>>
>>wsm dm ssldump bried
>>wsm dm ssldump detailed
>>wsm dm ssldump decrypt
>>
>>and some others? Have a look at the Security Guide of TrafficWorks
>>10.2.01 or 10.2.00...
>>
>>You have to move to the correct processor first of all (rconsole x y).
>>
>>X = slot
>>Y = processor
>>
>>R, Oliver
>>
>>
>>
>>At 09:06 20.06.2008, Mike Lott wrote:
>>>on the ServerIron before moving my
>>>eyes to the backend servers. Any clues?