[f-nsp] bricked foundry?

[david raistrick]

On Sun, 14 Sep 2008, Matthias Gelbhardt wrote:

> I have a FESX424-PREM. Unfortunatly the firmware upgrade went terribly wrong 
> and so I do not have a working image in the primary flash. I suppose that was

I assume it's not under support anymore?   The support folks have walked 
me through unbricking a serveriron a few times (different situation, 
though.  tftp'd a config that wouldn't boot)


> Unfortunatly this image seems not to have any IP connectivity, which I do not 
> understand (any ip and bgp commands in the startup config are not executed).

sounds like switch code instead of router code.   different command set to 
set an IP and default route.  (which I don't have handy)

...david



---
david raistrick        http://www.netmeister.org/news/learn2quote.html
drais at icantclick.org             http://www.expita.com/nomime.html