[f-nsp] Route Not Entering Routing Table

[Jeroen Oldenhof]

Joe,

a 'sh ip route direct' only shows the directly attached routes, routes 
which are there because an IP in that subnet is configured on a local 
(physical or virtual) interface.
Doesn't your route appear as a static route?

'show ip route static'

And, as Jeroen Wunnink stated, it appears your EXTERNALIP is not 
reachable.. what is the output of 'show ip route EXTERNALIP' ?

Best,
  - Jeroen

Joseph Hardeman schreef:
> Greetings,
>
> I was wondering if anyone might know why when I add an IP to an 
> External facing Interface and add "ip route 0.0.0.0 0.0.0.0 EXTERNALIP 
> distance 240" in the config, why when I do a "sh ip route direct" it 
> would not show up in the output?  I have added "ip policy 
> prefer-direct-route" to the BI8000 but I do not see that IP in the 
> routing table, nor is it pingable from outside of our network.  It is 
> a public facing IP.  I have tried different LX modules and also 
> different ports on two different cards on that system.
>
> Thanks
>
> Joe
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp